manualshive.com logo in svg

Johnson Controls HS3032, Справочное руководство

Познакомьтесь с продуктом Johnson Controls HS3032 и загрузите бесплатное Руководство по эксплуатации на нашем сайте. Получите доступ к подробной информации и инструкциям по использованию этого продукта. Посетите наш сайт, чтобы скачать его совершенно бесплатно.

Поделиться
Скачать
background image

Safety instructions for service personnel

Warning:

When using equipment connected to the telephone network, always follow the basic safety instructions provided

with this product. Save these instructions for future reference. Inform the end-user of the safety precautions that must be
observed when operating this equipment.

Before installing the equipment

Ensure your package includes the following items:

l

Installation and User manuals, including the safety instructions.

l

Read and save these instructions.

l

Follow all warnings and instructions specified within this document and/or on the equipment.

l

HS3032/HS3128/HS3248 alarm controller

l

Power Supply, direct plug-in

Selecting a suitable location for the alarm controller

Use the following list as a guide to find a suitable location to install this equipment:

l

Locate near a telephone socket and power outlet.

l

Select a location free from vibration and shock.

l

Place alarm controller on a flat, stable surface and follow the installation instructions.

l

Do not locate this product where people may walk on the secondary circuit cable(s).

l

Do not connect alarm controller to electrical the same circuit as large appliances.

l

Do not select a location that exposes your alarm controller to direct sunlight, excessive heat, moisture, vapors, chem-
icals or dust.

l

Do not install this equipment near water. (e.g., bath tub, kitchen/laundry sink, wet basement, near a swimming pool).

l

Do not install this equipment and accessories in areas where risk of explosion exists.

l

Do not connect this equipment to electrical outlets controlled by wall switches or automatic timers.

l

Avoid interference sources.

l

Avoid installing equipment near heaters, air conditioners, ventilators, and refrigerators.

l

Avoid locating equipment close to or on top of large metal objects (e.g., wall studs).

l

See "Locating detectors and escape plan" on page 285 for information on locating smoke and CO detectors.

Safety precautions required during installation

l

Never install this equipment and/or telephone wiring during a lightning storm.

l

Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the net-
work interface.

l

Position cables so that accidents can not occur. Connected cables must not be subject to excessive mechanical
strain.

l

Use only the power supply provided with this equipment. Use of unauthorized power supplies may cause damage.

l

For direct plug-in versions, use the power supply module supplied with the device.

Warning:

This equipment has no mains on/off switch. The plug of the direct plug in versions of this equipment is intended to

serve as the disconnecting device. It is imperative that access to the mains plug and associated mains socket/outlet is never
obstructed. For permanently connected versions of this equipment the fuse in the connector block is the disconnect device. If
the neutral wire cannot be identified, then this equipment must be connected to a mains source that comes from a dis-
connect device that simultaneously disconnects both poles (Line and Neutral).

Important note for international market (EU, Australia, New Zealand)

This equipment is stationary-fixed and must be installed by Skilled Persons only. Skilled Person is defined as a person with
relevant education or experience to enable him or her to identify hazards and to take appropriate actions to reduce the risks
of injury to themselves and others.

l

It must be installed and used within an environment that provides the pollution degree max 2, over voltages category
II, in non-hazardous, indoor locations only.

l

Use authorized accessories only with this equipment. Do not place any object on the top of the cabinet of this equip-
ment! Do not spill any liquids on the cabinet.

l

Do not touch the equipment and its connected cables during an electrical storm; there may be a risk of electric shock.

l

Ensure that cables are positioned so that accidents cannot occur. Connected cables must not be subject to excessive
mechanical strain. Do not use the Alarm system to report a gas leak if the system is near a leak.

l

These safety instructions should not prevent you from contacting the distributor and/or the manufacturer to obtain any
further clarification and/or answers to your concerns.

- 2 -

Содержание HS3032







































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HS3032

D-Link DSN-640 Quick Installation Manual preview
DSN-640
Бренд: D-Link Страницы: 40
UNITED 7700 Series Maintenance & Operation Manual preview
7700 Series
Бренд: UNITED Страницы: 8
National Instruments PXIe-4302 Calibration Procedure preview
PXIe-4302
Бренд: National Instruments Страницы: 14
National Instruments PXIe-4302 User Manual preview
PXIe-4302
Бренд: National Instruments Страницы: 31
National Instruments NI-9244 User Manual And Specifications preview
NI-9244
Бренд: National Instruments Страницы: 50
National Instruments NI 9870 Operating Instructions And Specifications preview
NI 9870
Бренд: National Instruments Страницы: 24
National Instruments NI 9247 Getting Started Manual preview
NI 9247
Бренд: National Instruments Страницы: 21
National Instruments NI 9242 Getting Started Manual preview
NI 9242
Бренд: National Instruments Страницы: 39
National Instruments NI 9218 Getting Started preview
NI 9218
Бренд: National Instruments Страницы: 22
National Instruments NI 9263 Calibration Procedure preview
NI 9263
Бренд: National Instruments Страницы: 8
National Instruments NI 9425 Getting Started Manual preview
NI 9425
Бренд: National Instruments Страницы: 20
National Instruments NI 9234 Getting Started preview
NI 9234
Бренд: National Instruments Страницы: 9
National Instruments FIeldPoint FP-AO-200 Operating Instructions Manual preview
FIeldPoint FP-AO-200
Бренд: National Instruments Страницы: 13
National Instruments NI 9205 Getting Started Manual preview
NI 9205
Бренд: National Instruments Страницы: 26
National Instruments FieldPoint FP-1000 Operating Instructions Manual preview
FieldPoint FP-1000
Бренд: National Instruments Страницы: 12
National Instruments NI 9264 Getting Started Manual preview
NI 9264
Бренд: National Instruments Страницы: 20
Zodiac SIROCCO2 Spare Parts/Accessories Instructions Manual preview
SIROCCO2
Бренд: Zodiac Страницы: 12
National Instruments 73 Series Getting Started preview
73 Series
Бренд: National Instruments Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды