Johnson & Johnson ASP STERRAD 200, Руководство пользователя

Страница: 81 / 85

Troubleshooting
6
STERRAD
®
200 User’s Guide 79
Displayed Messages Printed Messages Condition/Action
Call ASP Technical Service needed to run a cycle. Call the ASP
Customer Care Center.
Temperature Out Of Range
Temperature Out Of
Range (System
temperature parameters
are included on printout.) The door, chamber, vaporizer, or tube
temperatures are above or below the
operating temperatures. Call the ASP
Customer Care Center.
Timeout Failure
Timeout Failure A timeout event occurred when the
sterilizer was unable to complete a task
within a preset timeout period. Run the
cycle again, if the timeout problem
persists, call the ASP Customer Care
Center.
Vacuum System Failure
Vacuum System Failure
(Vacuum system
parameters are included
on printout.)
The load may contain too much
moisture contain cellulose material or
there may be too many packages in the
chamber. If problem persists, start a
cycle with an empty chamber. If the
vacuum stage is still not successful,
call the ASP Customer Care Center.
Warming Up
Please Wait
No Printout
You must wait until the system warms
up to run a cycle.