Johnson & Johnson ASP STERRAD 200, Руководство пользователя

Страница: 55 / 85

Day-to-Day Operation
4
STERRAD
®
200 User’s Guide 53
Completing a Cycle
Cycle completion is signaled as follows:
•
A long beep sounds.
•
The paper printout (on the input side) shows the process parameters (in black
letters only; red letters usually indicate a problem).
•
For two door configurations requiring an ID and password: Cycle Completed
Successfully is shown on the display. You are automatically logged out from
the input side and must log in to the output side to open the door and remove
the load. After the load is removed, touch
Done and Close Doo r to log out
from the output side.
•
For one-door configurations requiring an ID and password: Cycle Completed
Successfully is shown on the display. After the load is removed, touch
Done
and Close Door to activate the log in screen for the next load.
Figure 20. Cycle Complete display for systems requiring an ID and password.