SECTION 7 - BASIC ELECTRICAL INFORMATION & ELECTRICAL SCHEMATICS
7-6
31215031
7.5
AMP CONNECTOR
Assembly
Check to be sure the wedge lock is in the open, or as-shipped,
position (See Figure 7-5.). Proceed as follows:
1.
To insert a contact, push it straight into the appropriate
circuit cavity as far as it will go (See Figure 7-7.).
2.
Pull back on the contact wire with a force of 1 or 2 lbs. to
be sure the retention fingers are holding the contact
(See Figure 7-7.).
Figure 7-5. Connector Assembly Figure 1
Figure 7-6. AMP Connector
Go to
Discount-Equipment.com
to
order your
parts
