SECTION 3 - CHASSIS & TURNTABLE
31215031
3-97
677
12
959
5-1-2
Starter relay power stage over temperature. Temperature over limit.
Threshold for error detection is an internal ECU
threshold.
Check cabling and start relay and if necessary
replace it,
check connection cable and if necessary repair
or replace it.
677
3
960
5-1-2
Starter relay low side short circuit to battery. Shortcut Low Side-Output to battery.
Threshold for error detection is an internal ECU
threshold.
Check cabling and start relay and if necessary
replace it,
check connection cable and if necessary repair
or replace it.
677
4
961
5-1-2
Starter relay low side short circuit to ground. Shortcut Low Side-Output to ground.
Threshold for error detection is an internal ECU
threshold.
Check cabling and start relay and if necessary
replace it,
check connection cable of terminal 50 and if
necessary repair or replace it.
729
12
547
263
Cold start aid relay: Over temperature error.
High temperature around the cold start aid
relay.
Check the functionality of relay and replace it if
needed.
Check the temperature around the cold start aid
relay during worst case operation.
898
9
305
1-1-8
Timeout error of CAN-Receive-Frame
TSC1TE.
Setpoint.
Timeout error (missing CAN-Bus message).
Check CAN-Bus cabling (Bus sheduling, polar-
ity, short circuit, power interrupt).
Test protocol of receiver and check CAN func-
tional range.
975
3
457
2-3-8
PWM-Signal fan, short-circuit to battery.
PWM-Signal fan, short-circuit to battery.
Check wiring, fan electronics and ECU.
1079
13
946
2-8-2
Failure of sensor supply voltage 1.
Suspected components EDC17cv52
Pin A19: DEF press / Exh.PressBeforeTurb (P3) /
Air Pump Press
/BrnFuelPressAfterDV2 Pin K19: Fan Speed Sen-
sor
Pin A21: LDF6T / Oil Press / Low Fuel Press Pin
A17: Rail Pressure Sensor
Suspected components EDC17cv54
Pin A21: CAM speed Pin K44: Delta Press Venturi
/ Poti EGR or Inlet Throttle
Pin A24: LDF6T / Oil Press / Low Fuel Press Pin
K43: Reserve 5V Sensor Supply
Pin A09: second foot pedal
Suspected components EDC17cv56
Pin A21: Cam speed Pin K44: DEF press / Air Filter
Differs
Pin A24: LDF6T / Oil Press / Low Fuel Press Pin
K43: second foot pedal
Pin A09: Delta Press Venturi
Check cabling of external components, check
working voltage and if necessary correct
it,
check connection cable and if necessary repair
or replace it,
if error is not removable, change ECU.
Table 3-11. Engine Fault Codes (Deutz Engine)
SPN
FMI
Deutz
Code
Blink
Code
Error Description
Possible Reasons For Error
Take Action For Repair (TAFR)
Go
to
Discount-Equipment.com
to
order
your
parts