SECTION 1 - SPECIFICATIONS
31215031
1-9
1.9
OPERATOR MAINTENANCE
Table 1-11. Lubrication Specifications.
KEY
SPECIFICATIONS
MPG
Multipurpose Grease having a minimum dripping point of 350° F (177° C).
Excellent water resistance and adhesive qualities, and being of extreme
pressure type. (Timken OK 40 pounds minimum.)
EPGL
Extreme Pressure Gear Lube (oil) meeting API service classification GL-5 or
MIL-Spec MIL-L-2105
HO
Hydraulic Oil. Refer Section 1.7, Hydraulic Oil.
EO
Engine (crankcase) Oil. Gas - API SF, SH, SG class, MIL-L-2104. Diesel - API
CC/CD class, MIL-L-2104B/MIL-L-2104C.
NOTE:
The following numbers correspond to those in Figure 1-1.,
Figure 1-2. and Figure 1-3.
LUBRICATION INTERVALS ARE BASED ON MACHINE OPERATION UNDER NOR-
MAL CONDITIONS. FOR MACHINES USED IN MULTI-SHIFT OPERATIONS AND/
OR EXPOSED TO HOSTILE ENVIRONMENTS OR CONDITIONS, LUBRICATION
FREQUENCIES MUST BE INCREASED ACCORDINGLY.
1.
Swing Bearing
• Lube Point(s) - 1 Grease Fittings
• Capacity - A/R
• Lube - MPG
• Interval - Every 3 months or 150 hrs of operation
Comments - Remote Access. Apply grease and rotate in 90
degree intervals until bearing is completely lubricated.
2.
Wheel Bearings (If equipped)
• Lube Point(s) - Repack
• Capacity - A/R
• Lube - MPG
• Interval - Every 2 years or 1200 hours of operation.
3.
Swing Drive Hub
• Lube Point(s) - Level/Fill Plug
• Capacity - 43 oz. (1.3 L)
• Lube - 90w80 Gear Oil
• Interval - Check level every 3 months or 150 hrs of opera-
tion; change every 2 years or 1200 hours of operation.
Go to
Discount-Equipment.com
to
order your
parts
