![background image](http://html1.mh-extra.com/html/jensen/jenroll-ex12/jenroll-ex12_manual_3757272013.webp)
CHAPTER VII
MAINTENANCE
KAPITEL VII
VEDLIGEHOLD
MAINTENANCE SCHEME
VEDLIGEHOLDSPLAN
657206DK1
VII – 2.6.201
7.2.6 V-belts
7.2.6 Kileremme
Adjustment/tensioning of V-belts
Justering/stramning af kileremme
The correct belt tension is important for the function
of the drive.
Den korrekte remspænding er vigtig for drevets
funktion.
If the belt tension is too low, the belts will slide in the
tracks of the belt pulleys and thus be worn out too
quickly. If, on the other hand, the belt tension is too
high, the risk that the belt breaks is considerably
increased. The deflection force of a deflection ("A")
of 15 mm/m span ("C") should lie between:
Hvis remspændingen er for lav, vil remmene glide i
remskivernes spor og dermed slides for hurtigt. Hvis
remspændingen derimod er for høj, vil risikoen for,
at remmen knækker, øges væsentligt. Nedbøjnings-
kraften for en nedbøjning ("A") på 15 mm/m
spændvidde ("C") skal ligge mellem henholdsvis:
41 - 61 N at the intermediate drive
41 - 61 N ved mellemdrevet.
Adjustment of variable V-belt pulley on gears
Justering af variabel kileremskive på gear