![background image](http://html1.mh-extra.com/html/jensen/jenroll-ex12/jenroll-ex12_manual_3757272025.webp)
CHAPTER VII
MAINTENANCE
KAPITEL VII
VEDLIGEHOLD
MAINTENANCE SCHEME
VEDLIGEHOLDSPLAN
667209DK4
VII – 2.9.213
66720191: 66720191:
No. 18:
Perforations for adjusting screws
No. 19:
Perforation for locking screw
No. 20:
Key
Nr. 18:
Gennemboringer for stilleskruer
Nr. 19:
Gennemboring for sikringsskrue
Nr. 20:
Not
Adjustment/tensioning of V-belts
Justering/stramning af kileremme
1.
Dismount the V-belt at the roller (pos. no.
17) and fit in the locking screw (M10) in the
belt tightener (pos. no. 2).
1.
Kileremmen ved valsen (pos. nr. 17)
demonteres og sikringsskruen (M10) sættes
ind i remstrammeren (pos. nr. 2).
2.
Note the width measurement of the variable
pulley, see drawing above.
2.
Noter breddemål af den variable remskive,
se ovenstående tegning.
3.
Loosen the adjusting screws in the
perforations (pos. no. 18) (4 pieces) so that
the adjustable part can be screwed
outwards (3 mm Allen key).
3.
Løsn stilleskruerne i gennemboringerne
(pos. nr. 18) (4 stk.), så den stilbare del kan
skrues udad (3 mm unbrakonøgle).
4.
When the perforation to the locking screw of
the pulley (pos. no. 19) is fully visible,
loosen the locking screw (4 mm Allen key).
4. Når
gennemboringen
til
remskivens sikrings-
skrue (pos. nr. 19) er fuldt synlig, løsnes
sikringsskruen (4 mm unbrakonøgle).
5.
Pull off the pulley and the key (pos. no. 20).
5.
Remskiven trækkes af og noten (pos. nr. 20)
tages af.
6.
Be aware of oil outflow and be sure to cover
the V-belts.
6.
Vær opmærksom på udløbende olie og sørg
for at afdække kileremmene.