JD JDL-420 Series, Руководство пользователя

Страница: 50 / 84

50
In the process of automatic ink washing, by adjusting the opening size of the switch
on the water pipeline, the amount of water sprayed by the water spray pipe can be
controlled.
Automatic ink washing action and sprinkling time setting and other methods, for
details, see the "Machine Electrical Use Manual"
Note: When washing ink, the water must not drop into the liquid or drip onto the
plate.
7.3、Method for removing and installing ink tank, see Fig.7.3
Fig.7.3 ink tank
Remove the ink tank method: Unscrew the handle fastening screws on both sides of the
ink tank stand, grab the hand of the ink tank and lift it up and then pull it out,
and the ink wash can be removed from the ink tank stand.
Installation method of the ink tank: the ink tank placed on the ink tank stand, hand
hold the ink tank handle forward flat push, push the ink tank in place and tighten
the ink tank stand on both sides of the handle tightening screw.
In order to ensure that the ink washers and the ink washers in good contact with the
ink washers, while preventing the front of the ink washers to bump and hurt the ink
rollers, when necessary, the height of the ink washers need to be fine-tuned. Loosen
the six fastening screws of the wash-bath scraper during adjustment. After adjusting