Japan Radio Co. JLR-7600 Скачать руководство пользователя

Страница: 76 / 184

4-34

(2) Enter the waypoint number

If the waypoint number is known, enter the number and set the waypoint.

1. Press

the

key.

2. Press

the

key to select "WAY POINT NUM," and press the

key.

3. Press

the

key to enter the waypoint number, and press the

key.

4. Press

the

key to set "RADIUS", "WIDTH" and "GC/RL", and press the

key.

Please refer to "4.5.2 Creating Routes" for details.

5. Press

the

key to select "START," and press the

key.

Navigation will be started.

(3) Select a route number

If the route number is known, enter the number and set the route.

1. Press

the

key.

2. Press

the

key to select "ROUTE NUM," and press the

key.

3. Press

the

key to enter the route number, and press the

key. Navigation will be

started.

4. Press

the

key to set "LEG CHANGE", "DIRECTION" and "SPEED SMOOTHING", and

press the

key.

Please refer to "4.6.1 Selecting a Route from the Route List" for details.

5. Press

the

key to select "ROUTE" and "START", and press the

key.

Navigation will be started.

(4) Set the cursor position as the waypoint

Any cursor position on the plot screen can be set as waypoints. Multiple waypoints can be selected and
a temporary route created. Temporary routes can also be added to the route list.
1. Press

the

key.

2. Press

the

key to select "CURSOR POS," and press the

key.

3. The plot screen will be displayed. Press the key to display the cursor.

Move the cursor to the waypoint position, and press the

key.

For multiple waypoints, move the cursor again, and press the

key.

Pressing the

key deletes the previous waypoint.

At point you wish to make
waypoint, press

At point you wish to make final
waypoint,press twice.

Move cursor

Содержание JLR-7600

























































































































































































Результаты поиска

Содержание JLR-7600

Отзывы:

Похожие инструкции для JLR-7600

Бренды по названию

Популярные бренды

Japan Radio Co. JLR-7600, Инструкция по эксплуатации

Результаты поиска

Содержание JLR-7600

Отзывы:

Похожие инструкции для JLR-7600

Бренды по названию

Популярные бренды