Japan Radio Co. JLR-7600, Инструкция по эксплуатации

Страница: 101 / 184

4-59
4.13.8 Setting Beacon
Beacon setting can be performed.

An overview of submenus on the beacon setting screen is as follows.
(1) STATION SELECT: Set the beacon station selection method.
AUTO: The best beacon station is selected automatically from the GPS position.
MANUAL: You can set the frequency and bit rate manually.
(2) FREQUENCY: Set the frequency when station selection is set to manual.
(3) BIT RATE: Set the bit rate when station selection is set to manual.
1. Refer to "4.15.1 Change to a maintenance mode" and display the maintenance menu.
2. Press
the key to select "SENSOR" and "BEACON."
(1) Setting beacon station
3. Press the key to select "STATION SELECT."
4. Press the key to select the method, and press the key.
When selecting a station manually, set up the frequency and the bit rate.
(2) Setting frequency
3. Press
the key to select "FREQUENCY."
4. Press the key to set the frequency, and press the key.
(3) Setting bit rate
3. Press
the key to select "BIT RATE."
4. Press the key to select the bit rate, and press the key.
Procedure
Manual