Japan Radio Co. JLR-7600, Инструкция по эксплуатации

Страница: 63 / 184

4-21
4.4.2.3 Registering a Bearing and Distance from a Specified Position
A position can be specified as a start point, and then another position defined by its bearing and
distance from said start point can be registered in the waypoint list.
A start point can be selected from the following three items.
(1) Specified Latitude/Longitude:
Select "LAT/LON."
(2) Own Ship Position: Select "OWN SHIP."
(3) Position Registered in Waypoint List: Select "WPT No."
1. Refer to "4.4.2 Registering Waypoints" and display the waypoint registration screen.
2. Press
the key to select "POSITION", "BRG/DISTANCE."
3. Press "START POINT," press the key to select the start point, and press the key.
(1) When "LAT/LON" is selected
4. Enter "LATITUDE" and "LONGITUDE", and press the key.
(2) When "OWN SHIP" is selected
4. The own ship position is shown in "LAT" and "LON."
(4) When "WPT No" is selected
4. The waypoint list will be displayed. Move the cursor to the position you wish to use as the start
point, and press the key.
5. Press the key to enter "BRG" and press the key.
6. Press the key to enter "DISTANCE" and press the key.
7. Press the key to select "ENTER," and press the key.
The latitude and longitude of the waypoint calculated from the start point, and will be displayed.
8. Press the key to back to the waypoint registration screen
9. Press the key to select "ENTER," and press the key.
The waypoint position is registered.
Procedure