Japan Radio Co. JLR-7600, Инструкция по эксплуатации, Страница: 102 / 184

4-60
4.13.9 Setting SBAS
SBAS setting can be performed.
The sensor must support SBAS to perform SBAS setting.

An overview of submenus on the SBAS setting screen is as follows.
(1) SBAS SEARCH: The SBAS satellite can be set.
AUTO: The SBAS satellite is automatically set.
SBAS Satellite number: The SBAS satellite number is set manually.
(2) TYPE 0 INFO: Set whether test broadcast data is used.
ON: Used.
OFF: Not used (default).
(3) RANGING: Set whether SBAS satellite is used for positioning in the same way as the
GPS satellite.
ON: Used.
OFF: Not used (default).
1. Refer to "4.15.1 Change to a maintenance mode" and display the maintenance menu.
2. Press
the
key to select "SENSOR" and "SBAS."
(1) Setting SBAS satellites
3. Press
the key to select "SBAS SEARCH."
4. Press the key to select the search method, and press the key.
The SBAS satellite number can be selected manually.
Press the key to select the SBAS satellite number, and press the key.
(2) Setting type 0 information
3. Press
the key to select "TYPE 0 INFO."
4. Press the key to select "ON" or "OFF," and press the key.
(3) Setting ranging
3. Press
the key to select "RANGING."
4. Press the key to select "ON" or "OFF," and press the key.
Procedure