manualshive.com logo in svg

Japan Radio Co. JLR-7600, Инструкция по эксплуатации, Страница: 125 / 184

Поделиться
Скачать
Japan Radio Co. JLR-7600 Скачать руководство пользователя страница 125

5-1 

Section 5  Maintenance and Inspection 

 
Proper maintenance may greatly affect the lifespan of the equipment. In order to maintain the 
equipment in peak state, perform the following regularly. 
 

 

 

Do not perform internal inspections or modifications of the equipment. 
Inspection or modification by unauthorized personnel may result in fire, electric 
shock, or equipment failure. Please consult with JRC or an affiliate to perform 
internal inspections or repair. 

 

 
 
 

 

 

Do not use benzine, alcohol or thinner when cleaning this equipment. Doing so may 
result in removing the paint or changing of properties. Wipe off the grime lightly with 
a dry soft cloth. 

 
Use only the specified fuse. 
Failure to do so may result in fire or equipment failure. 

 
 
Use only the specified batteries. 
Failure to do so may result in equipment failure or malfunction. 
 
 

 

 

 

5.1  General Maintenance and Inspection 

 

  Always operate the equipment under standard power voltage levels (10.8 - 31.2 VDC). 

 

  The following shows general maintenance and inspection methods using standard tools. 

 

No. 

Item 

Maintenance and Inspection 

1 Cleaning 

Clean the panel screen, knobs, and switches with a soft cloth. There are no 
gears in the unit, so oil lubrication is unnecessary. 

2 Parts 

securing 

Check for loose screws, nuts, and connectors, and connect securely any 
that have loosened. 

 

  Perform inspection of the displayed items when the equipment is functioning normally. Compare 

operating results to the normal operation values in order to detect problems quickly. 

 
 
 

WARNING 

CAUTION 

Содержание JLR-7600

























































































































































































Отзывы:

Нет отзывов