Japan Radio Co. JAX-9B, Инструкция по эксплуатации

Страница: 48 / 118

Chapter 4 Operation
34
a) Direct Input of a Receiving Frequency Using Ten-key Switch
Operational Procedure
1) : Clear the indication of the receiving frequency.
2)
-
: Enter a receiving frequency.
•
Enter a receiving frequency in the unit of [kHz].
•
Enter the frequency down to the 100Hz place (Enter it down to the first decimal place).
The procedure of entering 7795.0 kHz is shown below for example.
No. Switch Indication Description
1 Clear an existing frequency.
2
Indicate an input value at the most
right place.
3
Indicate the next input value at the
most right place and shift the
previous value to the left.
4
5
6
When the receiving frequency is
entered, the receiving starts.
MEMO
•
If any frequency outside of the receivable frequency range (2.0000 ~ 24.9999MHz) is
entered, the frequency indication is cleared.
•
If any erroneous frequency value is entered:
Press [CLR] switch to clear an erroneous frequency indication, then re-enter correct
value. However, a proper frequency can be re-entered by operating only ten-key by
using the function of clearing a frequency outside of the receivable frequency range.
Example: Enter 7795.0kHz
[7], [7], [9], [5], [2] (wrong entry) [*] (any number)
→
Clear frequency indication
→
[7], [7], [9], [5], [0]