Japan Radio Co. JAX-9B, Инструкция по эксплуатации

Страница: 24 / 118

Chapter 2 Names and Functions
10
No. Name Function Note
⑭
4
●
Combined function ( # +
□
)
Prints a list of frequency in a memory.
Accepted;
•AUTO mode
5
●
Combined function ( # +
□
)
Prints a list of timer program in a memory.
Accepted;
•AUTO mode
6
● Fine-adjusting mode of frequency
Uses to step up an indicated frequency in 100Hz under a
fine-adjusting mode of frequency.
Accepted;
•
under a fine-adjusting mode
7
●
Combined function ( # +
□
)
Starts an adjusting mode of frequency. To stop an adjusting mode
of frequency, press the [CLR] switch.
Accepted;
•
in recording
•
in waiting for recording
8 No combined function ( # +
□
)
9
● Fine-adjusting mode of frequency
Uses to step down an indicated frequency in 100Hz under a
fine-adjusting mode of frequency.
Accepted;
•
under a fine-adjusting mode
0
●
Combined function ( # +
□
)
Shows a software version on the LCD. The software version will
clear after about five seconds automatically.
Accepted;
•
in waiting for recording
⑮
#
Executes a combined function. The combined function is
activated by pressing a switch which has a combined function
after pressing the "#" switch. "#" on the lower right of the LCD
indicates accepting the “#” switch. To clear the “#”, press this
switch again. “#” disappears when 10 seconds pass while “#” is
indicated, and the operation of the combined function is canceled.
2.2.2 Display
No. Name Function
⑯
LCD
Displays time, frequency, recording mode, operating status of JAX-9B, entry data during the
operation of each setting.
⑰
POWER
LEDs
Shows power mode by two LEDs. (ON / TIMER)
•
Power ON : “ON” LED lights
•
Power OFF : Both LEDs light off
• Timer mode
: “TIMER” LED lights