Japan Radio Co. JAX-9B, Инструкция по эксплуатации

Страница: 63 / 118

Chapter 4 Operation
49
4.5.1 Registration Timer Program
Register the program for timer program recording.
Operation Procedure
The timer programs can be registered at the automatic recording mode only.
Switch the recording mode to the automatic recording mode before starting registration procedure,
if it is set to the manual recording mode.
1) : Start the timer program registration.
2)
-
: Enter the Program Number.
Program Number: 1 to15, Total 15 channels.
3) : Confirm the program Number.
4)
-
: Enter the receiving starting time.
Enter 4 digits of hours and minutes: [H] [H] [M] [M]
5) : Confirm the starting time.
6)
-
: Enter the receiving finishing time.
Enter 4 digits of hours and minutes: [H] [H] [M] [M]
7) : Confirm the finishing time.
8)
-
: Enter the receiving frequency channel / group channel (2-digit).
9) : Confirm the frequency channel.
10)
: Select the recording mode. * The operation of 12) - 15) is not
required for the automatic recording mode.
11) : Confirm the recording mode.
12) : Select the IOC if the manual recording mode is selected.
13) : Confirm the IOC.
14) : Select the Scan speed if the manual recording mode is selected.
15) : Confirm the Scan speed.