Japan Radio Co. JAX-9B, Инструкция по эксплуатации

Страница: 59 / 118

Chapter 4 Operation
45
•
Execute the operation for registration of all the channels up to the last channel (CH*9)
in the same group in order to use the automatic frequency selection function.
If it is unnecessary to enter any frequencies, only press [ENT] switch so that the
registered frequencies will be cleared.
Example:In receiving the broadcasting station that broadcasts with six frequencies
by the automatic frequency selection function, it is necessary to register
receiving frequencies as follows;
•
Register receiving frequencies from *1 CH to *6 CH.
•
Clear registered frequencies from *7 CH to *9 CH .
4.4.2 Deleting Registered Frequencies
Operation Procedure
1) : Clear the received frequency indication.
2) : Set the frequency channel readout mode.
3)
-
: Specify any channels to be cleared.
4)
: Push [ENT] switch when no frequency is indicated, and the registration
on any specified channels will be cleared.
5)
or
: Set the receiving frequency, and return to the standby mode.
NOTE
•
Executing the operation of setting the receiving frequency (reading-out the frequency
channel / manual setting of the frequency) can end the operation for clearing the
frequency channels.