Japan Radio Co. JAX-9B, Инструкция по эксплуатации

Страница: 23 / 118

Chapter 2 Names and Functions
9
No. Name Function Note
⑨
Shows the present time and set the correct time.
To end the clock setting mode, press this switch.
Not accepted;
•
during Program entry
⑩
MO
Selects a channel for reading a registered frequency.
Press a channel number after pressing MO, a registered frequency
in the selecting channel is read.
Not accepted;
•
during Program entry
•
during Clock setting mode
⑪ CH Selects a channel for registering or deleting a frequency.
Not accepted;
•
during Program entry
•
during Clock setting mode
⑫
ENT
Uses for registering a frequency, setting program and the correct
time, and matching phases. Press this switch for entry of data.
Accepted;
•
during all
registering-operation
⑬
CLR
•
Clears a frequency displayed on the LCD.
•
Clears a registered frequency in channel memory, and registered
program in timer program memory.
•
Stops a list printing.
⑭
TEN
key
●
Single function
Uses for entering a frequency, time, channel number, and so forth.
1: REV
●
Combined function ( # +
□
)
Reverses the black and white shades of the original image if the
original image has white images on the black ground. To return to
the normal printing, press the [#] + [REV] again.
"R" character on the lower right of the LCD indicates under the
reverse printing mode.
2: EXT
●
Combined function ( # +
□
)
Enables an external receiver (other than the receiver in JAX-9B)
to receive the facsimile broadcasting.
To return to using the receiver in JAX-9B, press the [#] + [EXT]
again. "E" character on the lower right of the LCD indicates under
the external receiver mode.
3: ATT
●
Combined function ( # +
□
)
Uses to attenuate external noises or disturbing noises from the
other station (if any). An activity of ATT reduces about 20dB
sensibility. Usually, keep it turned OFF. "A" character on the
lower right of the LCD indicates under the activating ATT.