Japan Radio Co. JAX-9B, Инструкция по эксплуатации, Страница: 52 / 118

Chapter 4 Operation
38
a) Setting Automatic Recording Mode
Operation Procedure
1)
: Set the recording mode to “AUTO”.
(The Automatic and the Manual recording modes are alternately switched over.)
No. Switch Indication Description
1
Manual recording mode
Automatic recording mode
•
Select the recording mode.
If the mode is set to “MANU”,
switch it to the “AUTO”.
2
•
Waiting for Start signal.
The indication blinks until the
facsimile broadcasting starts.
3
•
Receiving of Start signal
The broadcasting IOC is detected
from the Start signal and indicated.
4
•
Receiving of Phase signal
The indication of “Scan” blinks.
5
•
Phase matching
The broadcasting scan speed is
detected from the phase signal and
indicated. The indication of
“Phase” blinks.
6
•
Start recording
When the phase matching is
finished, recording starts.
7
•
Receiving Stop signal
The recording paper is fed and
stops at the cut position. JAX-9B
returns to the waiting status for the
reception of the next broascast.
2)
x 2
: Recording stops when [MAN] switch is pressed twice during recording.
Pressing it once only switches to manual recording mode and the
recording continues if the receiving parameters are matched with the
broadcasting parameters (IOC and Scan speed).