Japan Radio Co. JAX-9B, Инструкция по эксплуатации

Страница: 53 / 118

Chapter 4 Operation
39
b) Setting Manual Recording Mode
Switch to manual recording mode if the recording cannot start in automatic recording mode.
Operation Procedure
1)
: Set the recording mode to “MANU”.
(The Automatic and the Manual recording modes are alternately switched over.)
2) : Select IOC (density) and Scan speed.
No. Switch Indication Description
1
Automatic recording mode
Manual recording mode
•
Select the recording mode.
If the mode is set to “AUTO”,
switch it to the “MANU”.
2
•
Select IOC (density).
Whenever the switch is pressed, the
IOC of 288/576 are switched over.
3
•
Select Scan Speed.
Whenever the switch is pressed, the
Scan speed is switched over in
order of 60/90/120/240.
4
•
Start recording.
Recording starts by receiving the
phase or image signal.
5
•
Receiving Stop signal.
JAX-9B returns to the waiting
status for the reception of the next
broascast.
3)
X 1
: Recording stops by pressing [MAN] switch once during recording.
NOTE • In the manual recording mode, recording can start by detecting the similar phase signal in image
signals. If the similar phase signal is not contained in the image signals (broadcast), it is
impossible to start recording in the middle of image broadcasting.
•
Setting of wrong IOC (density) makes the recorded image vertically expanded or contracted.
•
Recording will not start when the wrong Scan speed is set.
•
If Scan speed is changed during recording, JAX-9B will enter the status of waiting for phase and
stop recording.