Jands ESP II 24, Руководство по эксплуатации

Страница: 28 / 53

28
Working with Scenes
Note:
Scenes can only be re-
corded when the desk is
set to RECORD mode.
The ESP II can record 10 Pages of 12 Scenes each for a total of 120
Scenes.
Setting the Page Number
•
Use the arrow buttons to move the cursor to the Page field.
• Use the Plus (+) and Minus (-) buttons to set the required Page
number.
Freeze
When the Page field is flashing it indicates that the Page number has
been changed while a Scene Master was set above zero. That fader
will not change to the new Page until it is faded to zero.
The Scene Controls
There are 12 Scene Master faders and 12 Flash buttons
Fader
The fader controls the level of the level of a Scene ranging from 0 to
100%.
Flash Buttons
These buttons correspond to the Scene faders and perform two functions:
1 Flash. The buttons are used to momentarily flash on a Scene.
2 Record. To Record a Scene, set up the desired output, hold the
Record button down and press a Scene Flash button.
LCD Display
The display shows the current Page number
Recording a Scene - Record and Point
•
Use the arrow buttons to move the cursor to the Page field.
• Use the Plus (+) and Minus (-) buttons to set the required Page
number.
• Use the Preset faders (and any other console controls) to set up the
lighting output required.
• Hold the Record button down and press the Flash button (beneath the
Scene fader)*.
• A message displays on the LCD showing the number of items re-
corded and how many are still available.
• Release both buttons.