Jands ESP II 24, Руководство по эксплуатации

Страница: 38 / 53

38
Working with FX
Console output can be recorded to the FX section in the same way as
Scenes are recorded. Up to 100 FX, which are intended for controlling
colour scrollers or other effects, can be recorded and then played back in
any order.
The FX Controls
Fader
The fader controls the level of the FX output ranging from 0 to 100%.
Flash Button
This button corresponds to the FX fader and performs two functions:
1 GO. The button is used to step through the recorded FX numbers.
2 Record. To Record an FX, set up the desired output, hold the Record
button down and press the FX Flash button.
LCD Display
The display above the FX fader shows the current FX output number and
the Next FX Press the flash button to activate the Next FX.
Recording a FX - Record and Point
•
Use the arrow buttons to move the cursor to the FX field.
• Use the Plus (+) and Minus (-) buttons to set the FX number.
• Use the Preset faders (and any other console controls) to set up the
lighting output required.
• Hold the Record button down and press the FX Flash button (beneath
the FX fader).
• A message displays on the LCD showing the number of items re-
corded and how many are still available.
• Release both buttons.
Changing the Playback Order
FX play back in numerical sequence, FX 2 follows FX 1 and so on. Any
unrecorded number is ignored, so if only FX 10, 20, 30, 40 are recorded,
presssing the flash button will step through 10, 20, 30, 40 and then loop
back to 10. To change the order:
• Use the arrow buttons to move the cursor to the NEXT FX field.
• Use the Plus (+) and Minus (-) buttons to set the required FX number.