Jands ESP II 24, Руководство по эксплуатации

Страница: 41 / 53

41
to The FX: field and use the Plus (+) and Minus (-) buttons to
change the number.
CH (Channel)
Can be set using the Plus (+) and Minus (-) buttons or by moving
any of the TOP preset faders. Moving a fader sets the channel
(CH) field to that number.
TO Can only be changed by using the Plus (+) and Minus (-) buttons
(the slider method is not available). Changes to level will effect all
channels from the CH number to the TO number, inclusive.
AT Used to set a new level for the Channel or channels set by the CH
and TO fields. AT can be changed by using the Plus (+) and
Minus (-) buttons or by moving the TOP preset fader until its level
matches the previously recorded level. Once a match has been
acheived the slider takes control of the level and can be used to set
the AT field.
For the slider to ‘take control’ of a channel recorded at Zero level
(AT=0) it is necessary to move the slider above zero, to select the
channel, then back to zero to match the level, then to the new level
setting.
Menu Fields
Settings
Edit FX Ch To At
FX 1 1 11 FF
Level
Channel to Edit
Figure 20
The Edit FX
FX Number