Jands ESP II 24, Руководство по эксплуатации

Страница: 27 / 53

27
Setup MCard
IMPORTANT
Insert the M-Card only when transferring data
The M-Card may be corrupted if the desk is turned on or off with the M-
Card in the console.
The ESP II MCard is an optional accessory which allows all the informa-
tion recorded in the console to be saved to a compact ramdisk. Anyone
who regularly runs the same show is strongly advised to fit an MCard. It
is not possible to access the MCard menu unless the console is fitted with
the MCard panel.
The MCard Menu
To open the MCard menu move the cursor to the MCard field and press
the + key. The menu contains 2 fields:
To MCard
To select this option and save the desk data To the Mcard move the
cursor to the TO MCARD field and press the Plus (+) key.
From MCard
To select this option and load data to the desk move the cursor to the
FROM MCARD field and press the Plus (+) key.
Saving to the MCard.
To save the information recorded in the ESP II follow these steps.
1. Insert a MCard in the rear panel slot, ensure that the MCard battery is
fitted and the write enable switch is on
2. Open the MCARD menu as detailed above.
3. Move the cursor to the TO MCARD field and press +
4. A record confirmation screen shows.
Loading from the MCard.
When information is loaded from a MCard all Scenes, Chases and
Patches are overwritten.
To retreive information recorded on a MCard to the ESP II , follow these
steps.
1. Insert the recorded MCard in the rear panel slot, ensure that the MCard
battery is fitted and the write enable switch is on
2. Open the MCARD menu as detailed above.
3. Move the cursor to the FROM MCARD field and press +
4. A loaded confirmation screen shows.