Jands ESP II 24, Руководство по эксплуатации

Страница: 22 / 53

22
Setup LCDs
Menu Fields
Settings
SETUP Cursor Contrast Bright
LCDs Block 8 8
Cursor type LCD Contrast
Figure8
The Setup LCDs Menu
LCD Brightness
TheLCD located on the front panel of the ESP II can be configured to
suit different lighting conditions and viewing angles.
The LCD Menu
To open the LCD menu move the cursor to the LCD field and press the +
key. The menu contains 3 fields.
Cursor
This field can be toggled between Block and Line by pressing the
plus (+) or minus (-) button. Generally a block cursor is easier to
locate in a menu.
Contrast
This field can be set to any value between 0 and 15 using either
the numeric keypad or the + and - buttons. Higher contrast set-
tings tend to make the LCDs more legible from lower viewing
angles.
Bright
This field can be set to any value between 0 and 15 using either
the numeric keypad or the + and - buttons. At 0 there is no back-
lighting of the LCDs, at 15 maximum backlighting is provided.
Backlighting should always be used in low ambient light condi-
tions but can be turned of if the console is in direct sunlight.