Jands ESP II 24, Руководство по эксплуатации

Страница: 46 / 53

46
Editing an Xf Cue
AT Used to set a new level for the Channel or channels set by the CH
and TO fields. AT can be changed by using the Plus (+) and
Minus (-) buttons or by moving the TOP preset fader until its level
matches the previously recorded level. Once a match has been
acheived the slider takes control of the level and can be used to set
the AT field.
For the slider to ‘take control’ of a channel recorded at Zero level
(AT=0) it is necessary to move the slider above zero, to select the
channel, then back to zero to match the level, then to the new level
setting.
Infade (Infade Time)
Infade time can be set anwhere in the range 0 to 99 minutes 59
seconds. The infade time determines how long it will take for the
Q to fade from zero to 100%
Outfde (Outfade Time)
Outfade time can be set anwhere in the range 0 up to 99 minutes
59 seconds. The outfade time determines how long it will take for
the Q to fade from 100% to zero.