Jands ESP II 24, Руководство по эксплуатации

Страница: 44 / 53

44
Editing a XF Cue
Editing a Crossfade Cue
A Crossfade (XF) Cue (Q) can be edited to change the levels of chanels
or groups of channels. Editing can be carried out ‘blind’, that is, without
the changes being seen on stage or ‘live’.
• Hold the EDIT button down and press the XF Flash button.
• Either use the Preset 1 (top preset) faders to set new levels or enter
Channel numbers and levels directly into the Edit XF Q menu. For
detailed explanations of this step refer to the Edit XF Q Menu section
below.
• When all changes have been made press the RECORD button.
• A message displays on the LCD showing the number of items re-
corded and how many are still available for future recording.
N.B.
Whenever the EDIT XF Q menu is opened the Preset faders are disabled
from outputing to the stage. However they can be used to set levels for
the item being edited.
Recording Changes made in Edit
To save the changes made using EDIT press the RECORD button. It is
not necessary to press record after each channel (or group of channels) is
set to a new level.
Live and Blind Editing
The ESP II allows edits to be carried out Live or Blind. An edit will be
Live if that XF Q is currently being outputed to the Stage (by one of the
XF Q Masters) otherwise it will be blind.
Editing a XF Q not on the current Page
It’s possible to blind Edit a XF Q which is not currently on the XF Q
Masters.
•
Hold the EDIT button down and press the XF Q Flash button.
• Move the cursor to the XF field and set the required XF number.
• Move the cursor to theQ# field and set the required XF Q number.
• Use the procedure described above to perform a blind edit.
Changing Fade Times
Fade times can be changed at any time without re-recording the Scene.
• Open the Edit XF Q menu
• Use the arrow buttons to move the cursor to the Infade field.