Jands ESP II 24, Руководство по эксплуатации

Страница: 35 / 53

35
Editing a Chase
Editing a Chase
A Chase can be edited to change the levels of chanels or groups of chan-
nels. Editing can be carried out ‘blind’, that is, without the changes being
seen on stage or ‘live’.
• Stop the Chase on the Step to be edited.
• Hold the EDIT button down and press the Chase Flash button.
• Either use the Preset 1 (top preset) faders to set new levels or enter
Channel numbers and levels directly into the Edit Chase menu. For
detailed explanations of this step refer to the Edit Chase Menu section
below.
• When all changes have been made press the RECORD button.
• A message displays on the LCD showing the number of items re-
corded and how many are still available for future recording.
N.B.
Whenever the EDIT CHASE menu is opened the Preset faders are disa-
bled from outputing to the stage. However they can be used to set levels
for the item being edited.
Recording Changes made in Edit
To save the changes made using EDIT press the RECORD button. It is
not necessary to press record after each channel (or group of channels) is
set to a new level.
Live and Blind Editing
The ESP II allows edits to be carried out Live or Blind. An edit will be
Live if that Chase is currently being outputed to the Stage otherwise it
will be blind.
Editing a Chase not on the Chase Master
It’s possible to blind Edit a Chase which is not currently on the Chase
Master.
•
Hold the EDIT button down and press the Chase Flash button.
• Move the cursor to the CHS: field and set the required Chase number.
• Move the cursor to the ST field and set the required Chase Step
number.
• Use the procedure described above to perform a blind edit
Adding a Step
• Set the ST (step) field to the step number that you wish to add.