J&J Amusements King Scorpion, Руководство по обслуживанию

Страница: 234 / 272

13-30
GO
-KARTS
B
U
MPERBOAT
S
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
503-304-8899 ENDURANCE CL
UTCH PLA
TES
TM
Throttle cable adjustment is setting
the amount of “throw” or “travel” the
cable pulls on the throttle arm.
The throttle cable housing end fitting is
threaded to allow for adjustment. This
adjustment can increase or decrease the
amount the cable moves the throttle arm.
To increase the amount of throttle travel, loosen
the jam nut closest to the throttle arm and slide
the housing away from the throttle arm. Then
tighten the nut on the back side of the throttle
bracket. Doing this will increase the amount of the
inner throttle cable showing between the throttle
bracket and the throttle arm. This process will
allow more travel on the throttle, thus making
the kart’s top speed faster. To slow down the top
speed of the kart, the process would be reversed.
NOTE: It is important to note that this adjustment
should be done by qualified personnel, and
any adjustments should be done in small
increments. If the throttle is over-adjusted, the
cable will not allow the arm to go to full rest.
The electric kart WILL NOT FUNCTION if the
throttle arm is not at full rest position every
time it is turned on. A fault code, (2 flash code;
illegal short) will show (see page 13-58).
Throttle arm
cable travel