J&J Amusements King Scorpion, Руководство по обслуживанию

Страница: 161 / 272

8-19
GO
-KARTS
B
U
MPERBOAT
S
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
503-304-8899 ENDURANCE CL
UTCH PLA
TES
TM
Technique combined with proper tools makes this
pesky job easy. First, note the orientation of the
spring to the keeper (the spring has a closed side
and an open side).
With a keeper removal tool (modified Stanley®
Mini wonder bar, part #55-045). Use the short end
of the bar and file or carefully grind the beveled
ends to a flat/blunt surface. Using the edge of a
suitable flat file, open the nail-pulling slot to 0.156”.
This will allow the post to pass into this slot.
To use the keeper removal tool, it is best to have
the closed side of the spring to the open end of the
keeper. Approach the open end of keeper with the
tool at 45° angle. Push the spring down and move
the tool toward the post. Use your thumb on the
back side of the keeper to rotate the keeper in a
rolling motion back over the top of the clutch post.
Closed side
Roll with thumb
Open side
Filed surface
Open to 0.156”
KEEPER REMOVAL TIPS
45° angle