3
CHAPTER 5 - MAINTENANCE
J-600 ELECTRIC
Guidelines
∙
After the first working hours, check if the bolts,
nuts, clamps on the tanks, wheel and axle are well
installed. Retighten them if necessary.
∙
Daily, after finishing the spray application, put
clean water in the tank, remove the nozzles and
run the sprayer till empty.
∙
Clean and reinstall the nozzles.
∙
Clean the main filter.
∙
Rinse off the inside and outside of the sprayer.
∙
Take off and wash the individual protective
clothing separated from other clothes.
∙
Take a shower with plenty of water and soap and
change your clothes.
∙
These procedures will avoid future problems
caused by strainer, nozzle and tube obstructions
and prolong the sprayer’s life, as well as protect
yourself.
ATTENTION!
Never wash sprayers or individual protective equipment in or close to rivers, lakes, streams,
brooks, dams, etc.
Always stop the sprayer and turn off the tractor’s engine before any kind of maintenance.
> Components - Main filter
filter cap
filtering element
packing ring
shut off valve
∙
The frequency of filter cleaning depends on the
quality of water and type of chemicals applied.
∙
Clean the filter when filling the tank or whenever
necessary.
> Main spout
∙
Remove the dosage unit from the spout daily or
whenever necessary.
deflector nozzles
