17
CHAPTER 1 - PRECAUTIONS
J-600 ELECTRIC
Warning to assemble the components
> Warning to adjust and hook the PTO shaft into the tractor
∙ Check the tractor’s owner’s manual prior to do
this operation.
∙ Turn off the tractor’s engine, activate the park-
ing brake and remove the key from the ignition,
before to hook the tractor’s PTO.
∙ Try to engage the PTO shaft into the tractor’s
PTO. In case it’s necessary to adjust the PTO shaft’s
lenght, make use of specific EPIs for this operation:
safety glass, gloves, boots, etc.
∙ When hooking the PTO shaft in the tractor, make
sure to lock the safety pin.
∙ The instructions on how to adjust the PTO shaft’s
lenght correctly are in chapter 2 “ASSEMBLY” in
this manual.
∙ After adjusting the lenght, clean and lubricate
the PTO shaft’s components. In this case, use
protective gloves.
∙ Never use the PTO shaft with no shield.
∙ The PTO shaft will be adjusted for the specific
use of the J400. It’s not recommended to use the
PTO shaft for other equipment.
∙ Do not make adaptations and PTO shaft reuse.
∙ Fix the safety chain from the PTO shaft shield
in the tractor; this chain will avoid that the shield
spin with it.
∙ Before to turn on the tractor’s PTO, fill up the
tank.