4
J-600 ELECTRIC
CHAPTER 2 - ASSEMBLING
Setting up the tractor
> Adjusting parts to hitch to the tractor’s three-point suspension
> Levelling box
∙
To adjust the transversal levelling of the
sprayer, turn the crank (1) located on the levelling
box.
∙
Release the lock (1) and turn the sleeve (2) to
adjust the length of the third point arm. During
transport, fasten the plate of the third point bar to
the pin (3) of the frame.
ATTENTION!
The instruction below is an example of what should be done for properly hitching the sprayer
to the tractor’s three-point suspension. To exemplify we have used the Ford 4600 tractor. Ho-
wever, you should proceed as directed in the operator’s manual of your tractor.
> Tie arm of the left bar
∙
To adjust the length of the left lift arm to the pro-
per position, loosen the pin and turn the lower half
(2) of the lift arm.
NOTE:
The grease fitting (1) should point up.
> Adjusting the third point
