14
CHAPTER 4 - OPERA
TION AND ADJUSTMENTS
J-600 ELECTRIC
Determining the spout flow rate
> Procedure
∙ Choose an even ground and level both the
sprayer and spout.
∙ Fill the tank and mark the water level.
∙ Set the flow rate regulating valve and run the
tractor with 540 rpm at the PTO.
∙ Spray for one minute and again fill the tank up
to the level previously marked and note the quan-
tity of water sprayed.
∙ Repeat this operation several times and take the
average.
ATTENTION!
TO INCREASE THE VOLUME:
- Raise the setting of the flow regulating valve.
- Reduce the spray swath.
- Reduce the tractor speed (keep 540 rpm at the PTO).
TO DECREASE THE VOLUME:
- Reduce the setting of the flow regulating valve.
- Extend the spray swath.
- Increase the tractor speed (keep 540 rpm at the PTO).
Calibrate the sprayer so as to achieve the best results without causing damage to the environment.
flow rate
regulating
valve
∙ Different flow rates can be obtaining through
the setting of the flow rate regulating valve.
