15
CHAPTER 4 - OPERA
TION AND ADJUSTMENTS
J-600 ELECTRIC
Flow rate table / Adjusting the auxiliary ducts
> Flow rate table
Valve
setting
Total flow rate (gpm)
Auxiliary ducts
Cone
nozzle
JA-1
(blue)
Cone
nozzle
JA-2*
(black)
Cone
nozzle
JA-3
(orange)
Cone
nozzle
JA-4
(red)
0
2
2.6
3.6
4
0,5
2.3
2.8
3.6
4.2
1,0
2.6
3
3.9
4.4
1,5
3
3.4
4
4.7
2,0
3.6
3.6
4.7
6.2
2,5
4.2
4.7
5.2
6.8
3,0
5.2
5.7
6.5
8
3,5
7
7
7.8
8.6
4,0
8.6
8.3
9
10
* Nozzles model installed on the auxiliary
ducts.
NOTE:
For a more homogeneous distribution of the chemical mixture along the spray swath, one
recommends to install on the auxiliary spouts the nozzles shown in the table above according
to the setting of the flow rate regulating valve.
ATTENTION!
The figures shown in the table above have been obtained with water applications. Therefore,
there may be variations due to the viscosity of the liquid to be applied.
> Adjusting the auxiliary ducts
∙ Adjust the auxiliary ducts so that the spray covers
the area close to the tractor to avoid failures in the
application.
ATTENTION!
∙ Turn off the duct before stopping or
maneuvering the tractor.
∙ Never spray against the wind.
∙ Never spray with strong winds.
∙ Never spray during the heat of the
day.
flow rate
regulating
valve