SCSG06 Issue:1 - 10/08/17
Original Language Version
© Jack Sealey Limited
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
Refer to instruction
manual
Wear eye
protection
Wear a breathing
mask
Wear protective
clothing
1. SAFETY
INSTRUCTIONS FOR:
PREMIER PRESSURE INDUSTRIAL BRAKE
CLEANER SPRAYER with VITON® SEALS
MODEL NO:
SCSG06
Be aware of the safety requirements for the fluids contained in the vessel, and wear personal protective equipment appropriate to those fluids.
Read and follow all the fluid manufacturers instructions for application and safe use.
Label vessel with chemical used, even if water.
It is recommended that individual vessels should be used for individual chemicals. Cross
contamination can give unexpected results.
DO NOT
spray at people, animals or protected insect species.
DO NOT
spray in high winds, at naked flames or sources of heat.
DO NOT
use the pressure sprayer for any purpose other than for which it is designed.
DO NOT
use whilst eating, drinking, smoking; under the influence of drugs, alcohol, intoxicating medication, or if fatigued.
DO NOT
allow children to use the sprayer without supervision.
2. INTRODUCTION
3. SPECIFICATION
Model No:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCSG06
Working Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1ltr
Total Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5ltr
4. OPERATION
4.1.
Grip the handle and rotate the vessel to separate (fig.1).
4.2.
Fill to a maximum of 1ltr (observe the graduated scale moulded into the vessel).
4.3.
Re-attach vessel keeping vertical, rotate until hand tight against neck seal. Pressurise unit by operating pressure pump handle until
the pressure relief valve starts to blow.
4.4.
Press the trigger to spray.
4.5.
The spray pattern may be changed by rotating the adjustable nozzle.
4.6.
After use, or before removing vessel, lift the pressure relief valve to vent the pressure.
Premium quality 1 litre hand pump sprayer. Manufactured for use with most oils, weed killers, brake cleaners and solvents. Safety valve with
depressurization option. Wide filling mouth (60mm) for easy refilling and reduced spillage. Translucent tank allows easy measurement of contents
using the side level indicator. Supplied with adjustable ‘cone’ nozzle, allowing easy and precise application of liquid. Robust composite
construction, with ergonomic pump and handle.
fig.1
