Binks 95AR, Руководство по обслуживанию

Страница: 1 / 16

EN
77-2655-R4.1 (1/2015) 1 / 16
SERVICE MANUAL
BINKS MODEL 95AR
AND 95ARV AUTOMATIC
CONVENTIONAL
AIR SPRAY GUN
(95ARV FOR CERAMIC COATINGS)
95AR 6467-XXXX-X
95ARV 6489-XXXX-X
MODEL 95AR AND 95ARV AUTOMATIC AIR
SPRAY GUNS
Ideal for coating test laboratories and where repeated fluid
flow adjustments are required. The 95AR Automatic Spray
Gun is a conventional style air spray gun. It incorporates all
stainless steel fluid inlet, fluid nozzle, and fluid needle;
95ARV incorporates stainless steel fluid inlet, fluid nozzle
with T.C. insert and fluid needle with T.C. tip for spraying a
wide variety of conventional and waterborne coatings. It
is also pneumatically activated for application with recipro-
cating, rotary, spindle machines, and in stationary gun set-
ups. Exceptionally rugged in construction, the Binks
Models 95AR and 95ARV automatic guns are built to stand
up under hard, continuous use. However, like any other
fine precision instruments, their most efficient operation
depends on a knowledge of their construction, operation,
and maintenance.
Properly handled and cared for, these guns will produce
beautiful, uniform finishing results long after other spray
guns have worn out.
STANDARD SET-UPS AVAILABLE (See page 9).
OPTIONAL SET-UPS PLEASE ORDER SEPARATELY
(See pages 8 and 9).
AIR SPRAY GUN WITH STAINLESS STEEL FLUID INLET
CAUTION
Before removing any components from spray gun, shut
off air and material pressure.
!