14
Term
Load C/V
Discharge C/V
Area sensor (Load)
Area sensor (Discharge)
Area sensor (Discharge)
Zone sensor
Transfer direction
Divert C/V
4. Advanced preparation
③
Sensors
④
Wiring materials
Necessary for wiring of power and signal cables to the controller.
Zone sensor
A sensor to detect the existence of totes within the zone
Area sensor
A sensor to detect load and discharge of totes to/from the zone
〈
Available wire diameter for controller connectors
〉
Power connector
Controller
Connector
Control connector
IB-E06F-M1
0.08
〜
0.5mm
2
（
AWG
：
28
〜
20
）
1.25
〜
2.5mm
2
（
AWG
：
16
〜
12
）
■
To select the current capacity of wiring materials, secure a high safety margin based on
the current value in the equipment to be used.
■
Longer wiring between the power supply unit and controllers could cause the voltage to
decrease, resulting in malfunction and/or damage.
Items to be prepared by customers
Devices to control this product, such as PLCs
②
Control devices
MABS technical document
Safety precautions
Advanced preparation
Product check
Structures
Installation/Wiring
Control/Operation
Maintenance/Inspection
Troubleshooting
Appendix
IB-E06F-M1 settings
Zone sensors to check the tote position, and area sensors to check loading and
discharging, etc.
Original notice - U1.1
