Turn the row with the less transfer balls to the
upstream side, and place on the stays.
3
Row of less
transfer
balls
■
When installing, be careful not to get
fingers caught.
■
Install this product in places with a
mounting surface tilt (inclination) of 0.5%
or less.
■
The vibration level in the installation
environment for this product should be
0.5G or less.
■
Observe safety regulations required for
installation locations or equipment in
use.
■
Install in locations where the weight of
this product and totes can be sufficiently
supported.
(For the main unit weight, refer to P.70)
MABS
Stay
Upstream side
32
Installing the MABS main unit
7. Installation/Wiring
MABS technical document
Safety precautions
Advanced preparation
Product check
Structures
Installation/Wiring
Control/Operation
Maintenance/Inspection
Troubleshooting
Appendix
IB-E06F-M1 settings
Original notice - U1.1
