42
Register the file name
Setting preparation
■
Set the IP address to avoid overlapping with other addresses for
IB-E06F-M1, etc.
Creating the project file
Start iCEP Lite, and create the project file.
1
Open “Properties”, and select “Internet Protocol Version4 (TCP/IPv4)”.
Click “Properties”
2
Set the IP address to “192.168.1.XXX”, and Subnet mask to “255.255.255.0”.
Click “OK”.
3
Click
Click
Click
Select
IP address
192.168.1.XXX
Subnet mask
255.255.255.0
Select “IB-E Series”
1
2
Click “OK”
3
3
1
2
8. IB-E06F-M1 settings
MABS technical document
Safety precautions
Advanced preparation
Product check
Structures
Installation/Wiring
Control/Operation
Maintenance/Inspection
Troubleshooting
Appendix
IB-E06F-M1 settings
Setting the IP address / Checking connection
↓
Creating the project file
↓
Registering IB-E06F-M1 to be used
↓
Registering comments
↓
Network settings
Complete
↓
Motor settings
↓
Swing angle settings
↓
Click
Original notice - U1.1
