Chapter 4
Getting Started
4-61
If the recorder is provided with the option "MASTER CLOCK" and if this option is
released, code 04 01, the type of impulse for the slave clocks has to be entered.
Both types of impulses, unipolar and bipolar, can be used.
6.
D1
D2
D3
Slave clocks
Select type of impulse with "
R
", field D2/D3.
Definition:
D1 = 05 = type of impulse for slave clocks
D2/D3 = uni = unipolar slave clocks
= bi = bipolar slave clocks
7.
Confirm setting with "
E
".
.
Recorder returns to normal operation.
Current date is displayed.
Check of Individuals
The symbol
is indicated by the column pointer.
The option check of individuals will be pre-set ex factory.
This option can only be installed later if the complete CPU-board is changed.
Hint
The functions signal times and check of individuals exclude each
other. Both functions use the same circuit on the recorder CPU.
External signal devices, e.g. horn, lamp are switched on to defined times. These
signal devices are controlled by a random number generator.
The percentage programmed is basis for the random number generator to activate
the signal devices according to an internal selection procedure.
If the value "00" is entered, the function "Check of individuals" can be switched off
completely.
Programming the percentage for "Check of individuals" replaces the menu "Signal
times" with same menu symbol. If the menu "Ribbon colour change" is left, the value
for the check of individuals can be programmed immediately.
