4-48
Getting Started
Chapter 4
Graphic Recorder
As a graphical card is not separated in IN- and OUT-clocking columns, but the days
of a period are arranged horizontally, only one column change per day has to be
executed. Only one column change timing per weekday has to be defined.
If a time value differing from 00:
00
.h is programmed, e.g. 00:
30
h, bookings can be
printed in the column of the previous day. So shifts which overlap the day-end can be
printed in one column.
Programming of the time values is identical with proceeding "Standard recorder with
one card lift".
Units destined for North America are pre-programmed with
column change = 00:00 h for each weekday.
Card Lift / Line Change Timing
The symbol
is indicated by the column pointer.
After the column change timing has been programmed in the last menu item, the
card lift timing has to be programmed in this menu.
You have to distinguish between:
•
Standard recorder
•
Graphic recorder with leaping imprint
See menu item "Card specific parameters - Type of recorder - Graphic
recorder".
•
Graphic recorder with creeping imprint
See menu item "Card specific parameters - Type or recorder -Graphic
recorder".
Standard Recorder
With standard recorders only one card lift per day is executed. Exception is a
standard recorder with 2 card lifts per day.
The time value for the second column change has already been programmed in the
menu "Column change - Standard recorder with two card lifts/day".
In this menu the timing for a column change from weekday to weekday has to be
programmed.
