4-4 Getting Started
Chapter 4
Proceeding
1.
Remove front cover
If the recorder is not yet opened, remove the front cover as described in
section "Open the recorder".
2.
.
Switch power switch to position "
1
".
→
Analogue clock is synchronised. Current
time is displayed until clock synchronisation
has finished.
.
Current date is displayed.
All time recorders have been programmed in the factory with current date and
Eastern Standard Time (EST). However, if the recorder was previously
switched on, or if your time zone is not Eastern Standard Time, you have to
re-set the time and date displayed.
.
D1
D2
D3
D2 = Hours, D3 = Minutes
→
Enter current hour with "
R
".
→
Confirm with "
E
".
→
Repeat steps 1 and 2 for minutes.
→
Set hands of analogue clock.
→
After time has been entered, the current date is displayed.
For more details on setting date and time, see section "Setting the Time and
Date".
3.
Close the unit and locking it.
See section "Close the Recorder".
The recorder is now ready for operation. The current time is shown on the
analogue clock.
In order to learn how to handle the recorder, you should do some sample
punches with blank time cards. See also section "Punching at the Recorder".
