Appendix A
Define your own card format
A-7
Proceeding
1.
D1
D2
D3
Select number of lines with "
R
".
Value range:
depends on type of recorder
D1 =
05
→
indicates the 5th submenu
"Number of lines"
D3 = XX = Number of lines
2.
Confirm selection with "
E
".
3.
Continue with "
S
".
Next submenu "Imprint".
The menu "
Print Format
" is independent of the card format defined. See chapter 4
"Getting Started - Programming - Print Format".
Column change
The symbol
is indicated by the column pointer
Definition of the column width.
The value entered in the menu item "Time card parameters - Number of columns"
refers to this menu. If, e.g., the value 08 has been programmed as number of
columns, the column width for each column is displayed in this menu.
For a card format freely defined, the values displayed can be altered according to the
card format.
If the column widths for the next columns have been erased, the value of the
previous column is displayed as default value. If the column width remains the same,
confirm the column width displayed with "
E
".
The accuracy of the entry is 1/10mm. The recorder ensures that the sum of all
column widths does not exceed the printer dimensions.
D1 = column
00 = left card edge
01 - xx = clocking column
→
The column No. will be increased automatically.
D2/D3 = column width in full mm
D3 (right digit) = column width in 1/10 mm
→
If the recorder will be programmed new, the first entered value will be
displayed again for the following entries.
