Iseki SZ330 SSM60, Руководство по эксплуатации

Страница: 80 / 91

79
• Parts code of blade.
4. INSPECTION OF GAUGE WHEELS & ROLLERS
As the gauge wheels are installed on the front and
rear ends of the mower, they are more vulnerable to
being hit and deformed by obstacles than any other
part. When a wheel does not turn smoothly or is
deformed, replace it with a new gauge wheel immedi-
ately.
Gauge wheels,1, are very important parts to set grass-
cutting height. If a wheel does not turn smoothly or is
deformed, replace it with a new gauge wheel immediate-
ly.
Make sure that all rollers,2, turn smoothly.
When wheels and rollers are hard to turn, disassemble
and clean them.
After re-assembly, be sure to apply grease to axle shafts
for gauge wheels and rollers.
5. CLEANING OF MOWER DECK
a. Remove both belt covers, and clear the grass and
dust accumulated under the cover before operation, or
shorter service life of the belts and damage to bear-
ings and oil seals will be caused.
CAUTION:Be sure to replace the removed
covers after cleaning.
b. Each blade shaft end and tension pulley end are
equipped with a grease fitting. Inject grease through
these fittings periodically and make sure that each part
rotates smoothly.
c. After mowing, clear the underside of the mower deck
and blades of accumulated grass and dirt.
Especially after operation in wet grass, wash them
without fail, or accumulated wet grass and dirt will
cause performance deterioration.
(1) Gauge wheels (2) Rollers
CHAPTER 5. INSPECTION AND MAINTENANCE OF MAJOR PARTS
Model
SSM60
SSM72
Punched 1D
8654 C
8655 C
1
1
2
1
2 2 1
FIG. 5-14