Iseki SZ330 SSM60, Руководство по эксплуатации

Страница: 14 / 91

13
6.5. If the engine stalls unexpectedly on the ramps,
depress the brake pedals immediately and roll the
Zero turn mower to the ground by releasing the
brakes gradually. Then start the engine and try
again.
6.6. Use ramps with the same or better specifications
mentioned below. When the Zero turn mower is
equipped with the attachments other than those
included in the specifications mentioned below, ask
your dealers for advice.
Specifications of the ramps for the SZ330
• Length......more than 4 times the height of the platform
of the truck
• Width (effective width)........................more than 30 cm
• Required quantity ............................................2 ramps
• Capacity (one ramp)..........................more than 750 kg
• Ramps should have anti-skid surfaces.
• The above specifications are effective with the Zero
turn mower with the following configurations.
• The Zero turn mower is not equipped with any attach-
ments or a cabin.
• The Zero turn mower is equipped with a standard
mower deck.
6.7. Park the truck on hard level ground. Hook the
ramps securely on the platform of the truck with the
top of the ramp level with the platform.
6.8. Drive the Zero turn mower carefully at the moment
the Zero turn mower moves from the ramps onto
the platform, for it changes angles abruptly.
6.9. When the Zero turn mower is loaded on the truck,
lower the mower deck onto the truck bed, stop the
engine, apply parking brakes, and withdraw the
starter key, chock the wheels, and rope it securely
to the truck. Refrain from unnecessary abrupt start-
ing, stopping, and turning during transportation, or
the Zero turn mower may shift position on the truck,
which is very dangerous.
CHAPTER 1. FOR SAFE OPERATION