manualshive.com logo in svg

Iseki SZ330 SSM60, Руководство по эксплуатации

Поделиться
Скачать
Iseki SZ330 SSM60 Скачать руководство пользователя страница 15

14

7. WHEN FILLING WITH FUEL:

7.1. Never smoke while refilling with fuel, nor allow any

open flames near the Zero turn mower.

7.2. Never open the fuel tank cap while the engine is

running or while it is still hot after operation. Wait
until the engine cools down sufficiently.

7.3. Provide adequate measures to prevent fuel from

spilling when pouring it into the fuel tank. Spilt fuel
should be wiped off completely.

7.4. Avoid refueling indoors. If this is inevitable, provide

sufficient ventilation.

7.5. Replace the fuel tank and container caps securely.

7.6. Store fuel in containers specifically designed for this

purposes.

8. MOUNTING AND DISMOUNTING OF THE MOWER

DRIVE SHAFT

The mower gear box is driven through a drive shaft with
universal joints from the Zero turn mower. When connect-
ing or disconnecting the shaft, follow the next instructions.

8.1. Lower the mower deck onto the gournd, stop the

engine, draw the engine key, and apply the parking
brakes before mounting or dismounting the drive
shaft. 

8.2. Shift the PTO switch to the OFF position (

N

).

8.3. Make sure that the PTO shaft and mower blades

stop completely.

8.4. The drive shaft should be mounted or dismounted

at the Zero turn mower side. Never leave the shaft
connected only at the Zero turn mower side. If the
PTO shaft be driven unexpectedly, the shaft will be
swung around and damage the Zero turn mower or
cause serious accidents.

9. ZERO TURN MOWER MAINTENANCE:

9.1. Never start the engine in a closed place. Exhaust

fumes contain poisonous carbon monoxide, so suf-
ficient ventilation should be provided when starting
the engine indoors.

9.2. Be  sure to wear safety glasses and gloves when

servicing the Zero turn mower.

9.3. When servicing the Zero turn mower or mounting or

dismounting the mower deck, place the Zero turn
mower on level, hard ground.

ZERO TURN MOWER

Содержание SZ330 SSM60




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды