manualshive.com logo in svg

Iseki SZ330 SSM60, Руководство по эксплуатации

Поделиться
Скачать
Iseki SZ330 SSM60 Скачать руководство пользователя страница 17

16

9.14. If any hydraulic fluid is injected accidentally into the

skin, it must be removed within a few hours by a
doctor familiar with this type of injury.

9.15. Never allow grass or leaves to accumulate around

heated parts such as the engine and the muffler, or
this may cause a fire.

9.16. Be sure to reinstall the removed parts in place.

Never attempt to start the engine with any parts
removed.

9.17. Never attempt unauthorized modification of the

Zero turn mower as this could be very hazardous.
Damaged or worn parts should be replaced with
ISEKI genuine spare parts. Unauthorized parts may
cause breakdown of the Zero turn mower, acci-
dents, and ISEKI warranty to expire.

9.18. Keep all nuts, blots and screws tight to be sure that

the equipment is in safe working condition.

10.MAINTENANCE OF THE ELECTRIC SYSTEM

10.1. TO MAINTAIN ELECTRIC WIRING

(1)

When servicing the electric wiring, stop the engine
without fail. Otherwise your hands or clothes may
be caught in or sandwiched between rotating parts.

(2)

Before manipulating electric parts, be sure to dis-
connect the earth battery cable (-), or you may get
an electric shock or be injured by sparks.

(3)

Loose electric terminals or connectors may not only
lower electrical performance but also cause short
circuit or leakage of electricity, which may lead to a
fire. Promptly repair or replace damaged wiring.

(4)

Remove chaff or dust from the battery, wiring, muf-
fler or engine. Otherwise it could result a fire.

10.2. TO HANDLE THE BATTERY

(1)

When working around the battery, avoid smoking.
The battery generates explosive hydrogen and oxy-
gen gases when it is being charged. Keep the bat-
tery away from sparks or open flames.

(2)

The battely should be inspected before starting the
engine. Be careful not to touch the electrolyte
makes contact with the skin or clothing, wash it off
immediately with water and then consult a doctor.

ZERO TURN MOWER

Содержание SZ330 SSM60




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды