SERVICE MANUAL
© ISA, s.r.o. 2014-2015. All rights reserved.
We reserve the right to change the specification without prior notification.
Always check for new version of this document@
Service manual V1.08 | Nov-2015 | LM0002-EN
Page 90 of 97
6.4.1
1-bit output control
To trigger LVLØ 1-bit output via KNX bus a toggle from 1 to 0 need to be send to the bus.
Example bus communication to control the output:
10/0/3 Write 1-bit
1
=send 1 to bus
10/0/3 Write 1-bit
0
=send 0 to bus
10/0/4 Receive 1-bit 1
= receive “ON” status of the output
10/0/3 Write 1-bit
1
=send 1 to bus
10/0/3 Write 1-bit
0
=send 0 to bus
10/0/4 Receive 1-bit 0
= receive “OFF” status of the output
6.4.2
2-byte write and display value
Change pool mode telegram with status feedback.
6.4.3
2-byte display status
Display water temperature.
